HOME
RoadSpark slim
RoadSpark slim plus
Elara
Control System
RoadSpark™ slim control system allows for automatic intensity control during night time (EKO mode).
The parameters can be set-up at a distance by remote control. After all the parameters are remotely set, the lamp continues operating according to the parameters as a standalone unit.
* Switching on and off as well as setting the parameters of EKO mode are programmable according to customer’s requirement.
** Graph is for illustrative purposes only.
Local Control
(SLIM system)
- Luminaires are programmable by means of a wireless remote control.
For every light unit such parameters as dimming value, dimming period, etc. can be adjusted. - After programming, luminaires work independently, and every night
reach the programmed brightness
both in standard and EKO mode.
Centralized Control
(SLIM+ system)
Power supply unit can be controlled
by 0-10 V PWM signal.
Luminaires can be centrally controlled via the POWERLINE (control by 230 VAC), or also by using the wireless signal.
Power Supply Unit
| Parameters | Label 6 | Label 7 | Label 8 | Label 9 | Label 10 | Label 11 | Label 12 |
|---|
| Operating voltage | 160 ÷ 250 VAC (90 ÷ 300 VAC optional) |
| Operating frequency | 47 ÷ 63 Hz |
| Power supply efficiency | ≥93% |
| Power supply PFC | ≥95% |
| Power supply and control system placement | Light pole, at the level of the hatch |
| Power supply and control system protection class | IP66 |
| Power supply and control system protection against condensation | ✓ |
| Operating temperature | -40 ÷ 50 °C |
| CE, RoHS conformity | ✓ |
| Compilance with standards | EN 55015; EN 61000-3; EN 61000-3/A1; EN 61000-3/A2 |
| Dimensions | 185x37x42 mm |
Control System
Parameters
SLIM
SLIM PLUS
Standard lighting intensity
✓
✓
EKO mode lighting intensity
✓
✓
EKO mode duration
✓
✓
Intensity spread of 10-100%
✓
✓
Distance programming of the lamp
✓
✓
Programming of lamps in batches
✗
✓
Grouping of lamps based on address (streets)
✗
✓
© 2015 Made with 
by MYZONE